Make a statement with this beautiful 4-inch x 4-inch custom made “What’s Good” iron-on embroidered patch with a variation of 3D stitching and flock (hair), what’s good is in Teal thread, neon bubble, and she has braids!! EXCLUSIVE patchThis patch won’t be found anywhere else!! I am the originator of this exclusive patch.Patch has adhesive on the back and is ready to be sealed with your heat press or iron (without steam)Enjoy!!Thanks so much for stopping by!**** How to apply your patch ****Our embroidered patches can be ironed onto anything you can iron: shirts, jeans, hats, blouses, pants, skirts, etc. Make your clothes and accessories unique!Are you creative? With a heat press or an iron, you can create a new look instantly. It’s soooo easy!Heat seal to polyester/cotton fabrics. Do not apply to rainwear (waterproof), highly elastic, rayon, nylon or tri-acetate fabrics. Once applied, applique is permanently attached to the garment and is washable, dryable and dry cleanable. For machine washing, turn garment inside-out before washing and drying.Iron on instructions for embroidered patches using an iron:Step 1: Set your iron at the hottest temperature setting. DO NOT USE STEAM DURING APPLICATION!Step 2: Place embroidered patch in the desired position and place a Teflon sheet on top.Step 3: Press the iron straight down for 35-45 seconds with as much constant pressure as possible. NO BACK AND FORTH.Step 4: Turn the garment inside-out and repeat steps 2 & 3.Step 5: Allow the patch to cool down. Instructions for using a Heat Press:Step 1: Set your heat press to 350 degrees.Step 2: Place your embroidered patch in the desired position and place a Teflon sheet on top. Step 3: Press the garment for 12 seconds.Step 4: Increase temperature to 375 degrees. Turn the garment inside-out and press for 10 more seconds.Step 5: Allow the embroidered patch to cool down.
Related products
